Tuesday, July 11, 2017
Caving in Minnisota - July 6th, 2017
I visited Niagara Cave, in Harmony MN. A nice cave, and among the tallest and narrowest that I've been in.
In the same area is the Mystery Cave and Forestville, a re-creation village, in the state park of the same name.
Stopped for the night at Shetek Lake S.P, I had a wonderful campsite with a view of the lake.
Minnisota - July 5th, 2017
I was caught in the rain just outside Wisconsin Dells; I shared an overpass with another biker. Had a picture, lost it.
Eighth(?) time crossing the Mississippi, first time on a bike.
Minnesota hwy 16, from La Crescent to Preston, was one of the most enjoyable rides I've had.
With wide open country of forests and farmland, very little traffic, and nice curves and hills, it is easily one of my favorite rides now. Sorry, again no pictures, One of the SD cards for the GoPro corrupted.
With getting caught in the rain, I barely made it to Forestville S.P. in time, my planned stop for the night.
Eighth(?) time crossing the Mississippi, first time on a bike.
Minnesota hwy 16, from La Crescent to Preston, was one of the most enjoyable rides I've had.
With wide open country of forests and farmland, very little traffic, and nice curves and hills, it is easily one of my favorite rides now. Sorry, again no pictures, One of the SD cards for the GoPro corrupted.
With getting caught in the rain, I barely made it to Forestville S.P. in time, my planned stop for the night.
Thursday, June 29, 2017
Starting out - June 7th, 2017
I am on a cross country trip to visit as many of the national parks as I can. The trip will be culminating at the solar eclipse on August 21st, either in the Grand Tetons or on the Oregon coast. And maybe afterward, if the weather has started cooling off in the southwest, to visit the parks there as well.
Posts will be dated as to when I am there, but posted afterwards when I get to the internet; as is this one, posted three weeks later, and out of order.
Perhaps after this trip, my faith in humanity will be restored.
Posts will be dated as to when I am there, but posted afterwards when I get to the internet; as is this one, posted three weeks later, and out of order.
Perhaps after this trip, my faith in humanity will be restored.
Labels:
camping,
Motorcycling
Location:
Kodak, TN 37764, USA
Dayton Air Show - June 24th, 2017
| Opening ceremonies |
| Redline team |
| Redline team |
| Geico skytypers preparing |
| T-50A Golden Eagle trainer |
| | |||
| B-25 Mitchell on bombing run |
| F-35 Lightning II |
| F-35 Lightning II |
| B-25 Mitchell |
| F-18 Super Hornet |
| B1-B Lancer |
![]() |
| B1-B Lancer cockpit |
| UH-1 Iroquois ("Huey") |
| AH-1 Cobra |
| Thunderbird F-16 Fighting Falcon |
Labels:
camping,
Motorcycling
Location:
Dayton, OH, USA
Saturday, March 29, 2014
Solar system installation at St. Elias
The St. Elias church in Tennessee has needed lighting for their new sanctuary for some time now. This winter we began discussing solar powered LED lighting. The new sanctuary does not have power connected, and they have been using candles and the occasional extension cord, for lighting. The altar area was very dark, which made it difficult to read during the service, and they often had to resort to flashlights and reading lights. Father Andreas (their priest) wanted to go with an off-grid solar system and asked me to design and build it.
To illustrate how dark the church was, this picture was taken in early afternoon using only the light from the windows. You can see how dark it is around the holy table.

For lighting the sanctuary, we decided upon LED strip lights, two of them covering the area well, in a warm white to simulate sunlight. For lighting the holy table we used some LED spots in a brighter white to facilitate reading.
For the panel itself, we determined a larger panel would be better to begin with, as they are considering adding a ceiling fan later; I did find a 12v DC ceiling fan that will work well. I found a 100 watt panel, with a charge controller, at a fair price. With the addition of the battery and the incidental wiring, we were ready to begin.
The first thing was to build the mobile frame that the panel will be installed upon. A mobile frame allows the panel(s) to be moved to best catch the sun, they can also be moved inside during harsh weather or to prevent vandalism. The frame is designed for hold three panels, although we are only installing one at this time. At the latitude that St. Elias is at, the best angle for the panel for catching the sun year-round was about 33.6 degrees.
Next was to build the battery enclosure. As this is a church, and there are candles in use constantly, a vented battery enclosure is essential. Lead-acid batteries can create harmful and explosive gases, not much in normal use, but the possibility for danger is eliminated by the venting. there is room for three batteries to allow for future expansion.
Here is Father Andreas working on the vents outside:
The installation of the lighting and running the wires and connections was all that was left. Here are pictures of the finished lighting:
And the finished panel:
This was the first construction project that I've attempted since the hand injury last year. I was pleased that I was able to do everything, it just took half again as long.
St. Elias is a neat church, in addition to being (now) solar powered, they have goats and ducks and are on their way to being self-sustaining. Father Andreas and I have also discussed a solar water heater, a composting toilet, windmill and other projects.
To illustrate how dark the church was, this picture was taken in early afternoon using only the light from the windows. You can see how dark it is around the holy table.

For lighting the sanctuary, we decided upon LED strip lights, two of them covering the area well, in a warm white to simulate sunlight. For lighting the holy table we used some LED spots in a brighter white to facilitate reading.
For the panel itself, we determined a larger panel would be better to begin with, as they are considering adding a ceiling fan later; I did find a 12v DC ceiling fan that will work well. I found a 100 watt panel, with a charge controller, at a fair price. With the addition of the battery and the incidental wiring, we were ready to begin.
The first thing was to build the mobile frame that the panel will be installed upon. A mobile frame allows the panel(s) to be moved to best catch the sun, they can also be moved inside during harsh weather or to prevent vandalism. The frame is designed for hold three panels, although we are only installing one at this time. At the latitude that St. Elias is at, the best angle for the panel for catching the sun year-round was about 33.6 degrees.
Next was to build the battery enclosure. As this is a church, and there are candles in use constantly, a vented battery enclosure is essential. Lead-acid batteries can create harmful and explosive gases, not much in normal use, but the possibility for danger is eliminated by the venting. there is room for three batteries to allow for future expansion.
Here is Father Andreas working on the vents outside:
The installation of the lighting and running the wires and connections was all that was left. Here are pictures of the finished lighting:
And the finished panel:
This was the first construction project that I've attempted since the hand injury last year. I was pleased that I was able to do everything, it just took half again as long.
St. Elias is a neat church, in addition to being (now) solar powered, they have goats and ducks and are on their way to being self-sustaining. Father Andreas and I have also discussed a solar water heater, a composting toilet, windmill and other projects.
Subscribe to:
Posts (Atom)




















