I was learning to use my GoPro today, I made a short video of my trip around the lake.
Wednesday, September 11, 2013
Tuesday, September 3, 2013
Vinyl graphics, part 1
Yesterday evening I got together with a friend of mine that owns a vinyl cutter and we finally started cutting the graphics for the trailer. In my previous post you saw him weeding, or removing the unwanted vinyl, on the large viking graphic for the left side. Here's the finished piece all ready for the backing.
Next we started on the large raven banner for the front of the trailer. Here I will show the steps how a vinyl graphic is made (for those that are unfamiliar).A roll of vinyl in loaded into the machine which connects to a computer very much like a printer or a plotter. The software sends the vector designs to the cutter which begins cutting. After the machine cuts the vinyl you have a sheet with barely visible cuts on it. Beginning at the outside, we begin weeding and you can begin to see the design.
And here's the finished banner reading for the backing. The backing covers the design and is used for transferring the vinyl from the paper to it's destination. On the right are a couple of smaller pieces with the backer on them.
And those smaller pieces in place. I picked up a kindle, cheap, and it reminded me of the hitchhiker guide, so it needed "Don't Panic!" in large friendly letters on it. The other was for the kayak, which I have named the "Wetware" (it's a computer term). There is more that will be going on the kayak later.
It will probably be a couple days before we can get the rest cut and put on the trailer.
Labels:
crafts,
kayaking,
Microhouse,
Vikings
Subscribe to:
Posts (Atom)







