Wednesday, July 24, 2013

A late update

    My apologies, a link to mirror posts from another location has not been working. I only recently found out, but to be honest, there have not been a lot of them. I will be spending the next few days re-posting them here.
    Firstly, to catch you up with events:
    I did finish the trailer and have been living in it since last September. I moved the RV out of the spot and backed the new trailer in. Using four pavers and jack stands, I lifted and leveled the trailer, making it very stable.
    I'm pleased to report that the insulation did fine and I stayed warm all winter. I use an oil-filled radiator (the one you will remember from an earlier post) and it did just fine. With the insulation in the trailer I did not have to turn the heat up past two on most days, three on the coldest (the highest setting on it is 6), so I count that as a win.
    I put together an outdoor kitchen; I was fortunate enough to find a used solid-state refrigerator at the ReStore for $35. If you are not familiar with them I shall explain: Solid-state (or Peltier) refrigerators do not have a compressor and refrigerant, they use a silicon chip that, when powered, transfers heat from one side of the chip, to the other. Two heat sinks with fans, one on either side of the chip, complete the entire workings. The heat sink on the inside absorbs heat from the air inside the refrigerator, the chip transfers it to the outside, where the second heat sink then emits the heat to the outside air (more information can be found here). I have found it to be very energy efficient. That, with a folding table (found free in good shape) and the hot-plate I already had, completed the kitchen; and this spring I added a canopy to provide some shade and a couple of strings of solar lights for in the evenings.


    This summer has been rather warm, in the trailer, so far. The fans that I had installed in the skylight did not always keep up with the heat. Fortunately I still had another fan that I placed in one of the windows. From my monitoring of my energy usage (I'll spare you the math this time) I'm used about $25 a month in the winter, and $15-20 in the summer. And like most electric bills, most of that it my heating and cooling. With more shade in the summer, I could probably bring that down to $10.
   And now the bad news; in early April I was injured at work (the other reason why you haven't heard from me). My hand was severely cut on all four fingers and my thumb. This effectively cancelled all summer plans. I have about 60% of the use of my hand back now, but a good portion is still numb and my thumb just barely bends. So, I have not gone riding all summer, nor gone kayaking as I had planned. I did do some camping and hiking on memorial day weekend, at natural bridge in Kentucky. This waterfall wasn't out-of-the way, but it was in an area that many people (including my fellow hikers) miss. It was tall enough for me to shower in (I'm 6'2") with the pool underneath, and about ten feet wide and a large sandy beach to stretch out on. Probably one of the nicest spots in the park.


    I've improved my camping equipment, bought a lighter hammock and backpack (with a camelback). With my backpack with the food and change of clothes up in a tree, this was my campsite:


    I was using my rain jacket for shade and to keep the bugs off. The new hammock was very comfortable and was much lighter in my pack than the previous canvas one. I also had taken my tiny soda can alcohol burner, which generated quite a bit of interest when I cooked my entire dinner on it. My camping gear all fits in my pack now, so I've been keeping it in the trunk (for those spontaneous getaways).
    And that makes a nice lead into some of the re-posts.


Thursday, November 1, 2012

Almost done!

I apologize for taking so long to get back to you, but between autumn rain, a crazy work schedule and a mild case of the flu, I didn't get many full days available to work on the trailer. I ended up doing a little bit here and there, jumping from one thing to another; It made it difficult to to 'before and after' pics. But this should get you caught up to date.

I did get the bed frame built, as well as buying a mattress. I decided upon a memory foam mattress and, so far, I've been happy with it. I also covered the frame with canvas to both protect the wood and mattress. Here's the frame as I was building it and as finished:

My original idea for lifting the bed up to the ceiling was insufficient for the weight of both the frame and the mattress, so I'm having to redesign that, but otherwise it's gone well. And yes, those are the tools I used, a hand saw and a hand drill, to do most of the work on the trailer.

For the bookshelves I found a section of the wire shelving that had the supporting rail on the front and back. I tested it and it was able to withstand the weight of the books I'd be putting on it. I thought about several ways of building the supports for the shelves, but in the end I ordered some wire-frame cubes. Steel being stronger, by weight, than wood. You can see in the picture, I used the heavy shelving for the actual shelf, and the cubing frames for the supports (sides and back) and had enough left over for 'caging.'
In my experience I found that the books had to be kept in the shelves; No matter how smooth the road, just hit one pot-hole, and they'll be all over. So for this trailer, I rigged the extra frames so that they can slide in and lock into the front of the shelves in order to contain the books. I can still see where everything is, and it stays there. Of course, when I'm camped, the cages slide out and store out of the way.

I also got the networking all wired in, I'm typing to you from the trailer now. Here's my desk, which is that one exception I was talking about when I was telling you about the lighting. I bought an RGB LED bulb that came with a remote, for the light over the desk. I did decide, after a couple of days, to add another over the bed for a reading light.


And for the Pièce de résistance! A co-worker had a projector that he gave me in exchange for some computer work. I installed it on the shelf at the back of the trailer (the initial reason for the shelf actually) and with the addition of a 5.1 speaker system, I have a home theater!

I'm working on the screen, just a sheet now and it seems to work well. Yes...I know a home theater is not exactly energy saving, but am I not entitled to a little after saving all the rest? Well, we will see how much it costs me after the first month.

The final couple of days, I was moving the RV and both the old and new trailers around, as well as working on the trailer. During this time, poor Freyja had to spend most of the day outside in her kennel. But now that that is all done she and the boys have plenty of room to go outside. I found more of the wire frame cubes at the ReStore and are using them as caging for them to get from the cat-door in the trailer to the litter box. I'm not keeping that inside if I can help it, especially in winter! I have a lot more of the cubes than what you see here, and they will be used for my kitchen. I'm looking at either an Easy-up or some sort of gazebo that will both break down easily and be sturdy for over my kitchen.

That gets you about caught up. I have a few more things to do, and may have to change a few things as I live in it and find what ideas didn't work. I'll keep you posted, thanks for reading!

Thursday, September 27, 2012

Hiking in Tenn and some new lights

It's been a few days, I know, but I had to take some time off an relax a bit before autumn really sets in. I took a trip down to the Smoky Mountains and did some hiking and saw some friends. I finally got around to seeing Gabe Mountain and Hen Wallow Falls; it's one of the shorter hikes but I kept doing the longer hikes in the past as Hen Wallow is a 'there and back' rather than part of a loop. I got up real early to catch the morning light.
Gabe Mountain trail
I spend some time at the falls as I knew it would be some time before anyone else arrived and I would have the place to myself for awhile.
Hen Wallow Falls
When I got home, it was back to work on the trailer, as I had a couple days of my vacation left. I finished the headliner (as you can see in the pics below) and installed a couple of shelves along the ceiling. The lights I had ordered had also arrived; I had found on Amazon a string of LED lights that were 12v and were RGB, meaning I could change their color to anything that suited me. In addition I had picked up some 110v LED lights on clearance after the holidays last year. This gives me all the lighting I need (with one exception) for when I'm plugged in and for when I'm running on solar.

I've gotten the 110v lights installed, both a white and a blue string. I can use both or just each separately as I installed a switched outlet just for them. (blue is shown)
 The 12v LEDs will be installed along the opposite wall as indirect lighting. Here they are when I was testing them right out of the package. They came with an infrared receiver and a 42 button remote. The direct light from the string overwhelmed the camera, but as you can see from the reflected glow I had them set to violet. The remote comes with 24 preset colors, and places for 6 user defined settings, as well as flash, strobe and fade; more than I'll need (or ever use).
I think I'm ready to begin building the bed frame and look into buying a mattress.

Friday, September 14, 2012

A desk and a start on the ceiling

It's been awhile since I've had a good desk that I can work at. Right now I either work in bed or at a "desk" I made in the RV that I sit sideways at. I was actually looking at a new desk (frosted glass with a keyboard drawer at $100) that I was going to treat myself on. Well, the other day I was in the ReStore when I found a desk at a good price, actually a better desk but without a keyboard drawer. But between the price ($30) and that it would fit curve at the front of the trailer better. I wish I had taken a picture of it before I modified it, so you could get a better I idea of what I did.

First of all, it was obviously designed for computers before flat-screens, as there was a glass tier, about 2" above the main glass desk, that sat back behind the two wings and was large enough for a CRT monitor. Above that (and again behind the two side wings) was a third glass shelf, at the same level as the speaker shelves. The two wings were at an angle very similar to the curve of the front of the trailer (or so I was thinking) and would mount right up if I eliminated the back portion.

And that is what I ended up doing, there were two metal frames, bottom and middle, that I cut the back squares off, just leaving the three angled sections. I then drilled holes in them to mount what was the rear support in the center. I also moved the shelf brackets for the top shelf out onto the edges of the speaker shelves so that I can still use it. Here is the result:

 I did add one more thing after this photo, I added an additional support at the center of the upper glass shelf. I was concerned that the speaker shelves alone wouldn't support much weight upon it.

It is attached to the wall, so it is not going to slide around, with enough room for cables between it and the wall. I was planning to mount the left and right monitors to the (white) rail, but this desk will work out better as I can mount them closer to eye level without taking up desk space. The center monitor still will take desk space, as it will not mount on a wall.

As you can also see, I've finished putting up the side rails and the trim around the window (yea!). I've also added the second layer of insulation in the roof and the system to keep it in place. I started on the headliner as well, but started running out of daylight, so I'll probably finish that over the next couple of days after work.

Until then!

Thursday, September 13, 2012

Need my socks and an air guitar

I apologize for the hiatus, I had some vehicle trouble, but it's taken care of now.
I actually did get quite a bit done: The floor is done, with a few tricks. It looks great!

As well as the wall papering. I did something a little different with the walls (as you can see). You know the old adage that horizontal stripes make you look...well, bigger? I thought I'd try it to make it seem bigger. It does seem to work; I was working on the layout for the (upcoming) bed frame and I had to go back out to the trailer twice to verify the space. I kept thinking it was bigger! So, what did I use to achieve this? Bed sheets. They were about 1/10th the price of wallpaper; it was a little more than paint (after figuring in adhesive) but a much better result in my opinion. I have put most of the side rails back up (repainted them as well), a couple more to go as I have to cut them to fit around the windows.

While doing the floor, I didn't want to lose the use of the tie-downs, as I will be hauling the motorcycle when I'm traveling, so I came up with this:
Now you don't see it...
now you do!








All four tie-downs can be accessed this way, and when covered up they are barely noticeable. I'm currently figuring a way for a "tail-gate" for the floor, to keep debris out when I close the trailer's tail-gate; probably some small hinges and some of the extra floorboards.

More tomorrow!

Friday, July 6, 2012

A "road eater" maybe?

I got the second window in this afternoon, only took me about a quarter of the time the first one did. I had already made all the mistakes I could on the first one, including gashing my finger (about 1/2", but deep, I'll be fine though).

I do want to mention a local klunger today, he made something neat and useful. We met about a month ago when he came to me to find a bearing to get this project going. When he told me about it I asked him to stop by when he finished. Here's the pic:




Yes, that's a scooter with weed-eater motor! It was an electric scooter that the motor had died, so it already had a drive gear and chain on the rear tire. He cut a hole in the side of body to insert the shaft of the weed-eater and mounted a drive gear for the chain. The throttle on the handlebars works, as well as the brake. No lights, but if I got pulled over on this, I think I'd laugh my *ss off at the cop!

He actually rode it into town to show it to me, and let me tootle around the parking lot on it! He said he can get up to about 20mph on it, I only got up to about 10 in the lot. It weighs almost nothing and is 2-cycle to boot. So about an hour or so on a full tank? Plenty enough to get to work or school and back home. I'm tempted to make one myself!

If you know of any klunges, hacks or other neat projects, I'd love to hear about them!

Thursday, July 5, 2012

More windows

I apologize for no posts for awhile, the heat recently has been unbearable. I had picked up a thermometer with a remote sensor for later installation in the trailer. For now I have the remote under the awning of the RV, when I got home one afternoon, this is what I saw:

Yes! That is a high of 111 degrees. But I got back to working on the trailer today, several hours in fact. Worked some more on the wiring, more 12v and some data cables, and I installed another window, his first of two.

I had been contemplating what to do about additional windows, ones that opened that is. I had pretty much decided upon ordering some windows from the home store, expensive, but they would be the exact size I needed. While searching for some other parts I needed for another project I found a van with the same windows as mine, and I began thinking. That would be cool! The trailer would match the van, and the windows are already designed for a mobile installation. Talking to the owner I was able to pick up two windows for $25 apiece, much less expensive than ordering a similarly sized window would have been.

 Next involved cutting (yet another) hole in the trailer. After making a cardboard template, I laid out the location for the window and began cutting.

A couple of problems I anticipated when I began this: First, the windows are curved, to match the curve of the side of the van whereas the trailer wall is flat. This meant that the top and bottom of the window would be flat against the wall, the center would curve away, leaving a gap of about an inch. I've spent the past week trying out various solutions, even using pieces of vinyl siding to fill the gap. In the end, the second issue ending up being the solution to the first!

In the van, the wall is steel and thin, whereas the trailer's skin is aluminum and with the insulation and inside paneling is a little over a inch thick. The manufacturer used an aluminum rail around the inside of the window, screwed to the window frame to hold it in place, the steel supporting the weight of the window. The aluminum of the trailer alone would not support the weight, but the metal, insulation and paneling would, so I thought. What I did in the end, was to use sections of the mounting rail from the window to hold the upper and lower side of the window (you can see two in the picture above), only cutting the foam board insulation just enough so that it all was wedged in place at the end. at the sides of the window, I mounted it just far enough from the internal wall supports, so that when the rail pieces were installed, the metal wall would flex outward some, reducing the gap from the wall to the window frame. By doing this, the gap was reduced, at the center, to about 3/8". This was a distance easily filled by the bead of windshield caulking that I was using to waterproof it anyway! The remaining space under the edge of the window frame I filled with white window caulking, to improve aerodynamics mostly, but also for aesthetics and weatherproofing.

And I finished it just in time! As I was doing the last of the caulking a thunderstorm started rolling in. I had just enough time to put all the tools away and clean up the trash when it started raining. It was quite a good sized storm, a couple of (very!) close hits startled both the cats and I. But after it passed I checked the window, not a single leak, not even damp!

And as you can see in the picture, I even was able to use the blind from the original window. Tomorrow I'll be doing the other side.