Monday, March 29, 2021

Imperial Dam

 (This is posted late. I didn't have internet access for a few months.)

 I'll be staying at the Imperial Damn LTVA for awhile. It's right on the Colorado River, outside Yuma, AZ.


The Yuma Proving Grounds are right next door, military aircraft passing overhead is a daily occurrence. It was at the slabs as well, but there it was Chocolate Mountain, which was usually F-18s. Here it is mainly helicopters and the occasional Osprey.




Friday, March 26, 2021

Goodbye to the slabs

 (This is posted late. I didn't have internet access for a few months.)


I have decided to leave the slabs, for several reasons. First, there have been a rash of fires throughout the slabs, most of them appear to have been arson, the others...shall we say that they seem to be "cooking" fires.

Second, the LOWs organization is self-destructing at the national level. Long story, but I'm glad I hadn't joined yet.

Third, and most importantly, thievery has been rampant at the slabs. I keep being told that it's not normally like this, that the shutdown has precipitated it. But when I when my motorcycle was partially disassembled, I'd had enough.

Lastly, someone has been painting over the artwork on the landmarks around the slabs. Not to put new art, but for infantile graffiti.

Other than for short visits to friends, I don't intend to ever return to the slabs, this year has really put me off.


Wednesday, March 24, 2021

More art around the slabs.

  (This is posted late. I didn't have internet access for a few months.)


Some of the artwork near the hot spring at the slabs.


And the back side.




One more, a memorial for Box Truck Cory, a youtuber that passed away last January (2020).
Scorched freedom was the name of his camp.




Friday, December 11, 2020

Wednesday, December 9, 2020

BOOM


When camping next to a firing range, you have to be prepared to be awakened by explosions at any time.

Monday, December 7, 2020

Saturday, December 5, 2020

Converting Tree Dazzler lights for portable use,

This is for converting these lights for portable / low power use.

Carefully pry open the controller to expose the control board.

Cut the end, opposite from the male connector, off of a USB cord. Remove the outer cover to about an inch; separate the wires and strip the insulation from the red and black wires. Cover and insulate the remaining wires, I used heat shrink tubing.
Drill a small hole, large enough for the USB cord, in the side of the controller case, avoiding the locking tabs.

Solder the red and black wires of the USB cord to the matching solder points on the control board, being careful to avoid disconnecting the original wires.

Re-assemble the controller case, routing the USB cable through the hole the drilled hole in the side. Connect the USB cable to a USB charger for low-power or automotive use; a battery pack (as above) for portable or off-grid use; or the plug for household use. Do not use both at the same time, or attempt to use the USB to power other devices.





 No warranty is expressed or implied, I am not responsible for any damage, to property or ego, that you experience due to attempting to follow these directions. Your stupidity is your own.