I had a couple of great finds yesterday. I discovered that the wiring for the tail lights is inside the frame, and that the opening for it was large enough to run the 110 wiring in. So, with the help of a little grease, I threaded wire through the frame. This gave me two runs from front to back without having to drill any holes, and they are safely protected inside the steel tubing. In the end, there will be five outlets, one at each corner, inside, one outside where the power will be connected, and one additional switched outlet that will be mounted near the ceiling.
I have a store near me, called The Re-store, run by Habitat for Humanity, they accept donations of all sorts, but mainly salvage from construction and demolition of homes and offices. I have found a lot of what I have needed there, including all of the 110v wire I have needed (including the armored) and the outlets. I used two GCFI outlets to give me two 'circuits' as I did not want to install a breaker box.
At the Re-store I also found this! A light from a door frame for only $35. When I saw it I was thinking of installing it in the door, but I think it will weaken it too much. So instead I'm going to mount it in the wall next to the door; this will give me a floor to ceiling window. This is going to be epic!


No comments:
Post a Comment